Uncombining Wires

You can uncombine (split) a combined wire so that signals must use the separate wires.

Procedure

In the Design Browser (Design tab), right-click the combined wire and choose Uncombine.

Results

• The combined wire is removed from the Design Browser (Design tab) and is traced back to the child signals for which it is relevant.

• New wires are created for those child signals and are added below them.

• Cavities and Splice are created as necessary.

Parent Topic:

Combined Signals and Combined Wires

Related Topics

• Combined Signals and Combined Wires

• Creating a New Combined Signal from Selected Signals

• Adding Selected Signals to an Existing Combined Signal

• Combining Selected Signals with a Compatible Signal

• Removing Selected Child Signals from a Combined Signal

• Uncombining All Child Signals from a Combined Signal

• Creating a New Combined Wire from Selected Wires

• Creating a New Combined Wire from a Selected Set of Wires for a Combined Signal

• Adding Selected Wires to an Existing Combined Wire

• Combining Selected Wires with a Compatible Wire

Capital Systems Integrator User Guide, 2512.2606

Unpublished work. © 2026 Siemens