User Defined Tab

To access: From the Project Defaults window, click the User Defined tab.

Used by System Administrators to globally switch specific functionality on / off without modifying the rules, providing the rule is defined to permit this control.

Objects

Field	Description
Balance Tier Fill	Used if one or more available tiers on the network segment have a % fill less than the specified fill threshold. Select to activate Balance Tier Fill and route cables through the tier with the lowest % fill, to fill tiers at approximately the same rate. Clear to deactivate Balance Tier Fill and route cables through the tier with the lowest available number, to fill tiers one by one. Default is cleared.
Ignore bundling during %Fill	Select to activate cable bundle formations to be defined for use in fill calculations. Clear to deactivate the option. Note If cleared, any bundling defined for cables and work packages is reset. Default is cleared.
Major node tier switch	n/a
User-defined flag <#>	n/a
Show devices as well as entries	Select to display any valid device entry IDs and X/Y/Z coordinates in the Details Pane when the nodal network details are exported from NX. Recommended. Caution You must select the preference to display devices as triangle icons on the 3D assemblies in NX. Clear to exclude the entry IDs and coordinates. Default.

Parent Topic:

Project Defaults Window

Capital Cable Router User Guide, 2512.2602

Unpublished work. © 2026 Siemens