Combining Selected Wires with a Compatible Wire

You can combine one or more selected combinable wires with a compatible wire to create a new combined wire. Signals that used the separate wires can then use the combined wire.

Procedure

1. In the Design Browser (Design tab), select the wires that you want to combine with a compatible wire.

2. Right-click a selected wire and choose Combine > With > [Compatible Wire Name].Note To be compatible, a wire must share at least two combinable ends with the selected wires. If no compatible wires are available, there is no compatible menu option for you to select.

Results

The individual wires are removed and a combined wire is added below the combined signal to which the wires belong in the Design Browser (Design tab).

Parent Topic:

Combined Signals and Combined Wires

Related Topics

• Combined Signals and Combined Wires

• Creating a New Combined Signal from Selected Signals

• Adding Selected Signals to an Existing Combined Signal

• Combining Selected Signals with a Compatible Signal

• Removing Selected Child Signals from a Combined Signal

• Uncombining All Child Signals from a Combined Signal

• Creating a New Combined Wire from Selected Wires

• Creating a New Combined Wire from a Selected Set of Wires for a Combined Signal

• Adding Selected Wires to an Existing Combined Wire

• Uncombining Wires

Capital Systems Integrator User Guide, 2512.2606

Unpublished work. © 2026 Siemens