Converting a Multiple Termination to a Splice

After wiring synthesis, you can convert a multiple termination to a splice. The system adds a wire between the splice and the cavity where the multiple termination was located

Procedure

1. Right-click on the cavity where the multiple termination is located in the Design Browser (Design tab) Tree and choose the Add Splice at Cavity option from the pop-up menu. Alternatively, select the cavity, press Space Bar and enter Splice at Cavity.

2. The cursor changes to a black splice symbol . Position the cursor over the point on the diagram where you want the splice to be created and click. If you position the cursor over a location where the splice cannot be created, the cursor is a splice symbol with a line through it .

Results

The splice is added to the diagram and to the Design Browser (Design tab) and a wire is added between the splice and the cavity where the multiple termination was located.

Parent Topic:

Splice Editing in Capital Systems Integrator

Related Topics

• Creating a Splice

• Moving a Splice Manually

• Converting a Butt Splice to a Center Strip Splice

• Converting a Center Strip Splice to a Butt Splice

Capital Systems Integrator User Guide, 2512.2606

Unpublished work. © 2026 Siemens