Reports > Available Reports

Wire List

This report lists all wires on the selected design(s), along with the pins at which they are terminated.

Note

If applicable, the name of the connector, backshell, or splice will be marked with the Poke Home prefix specified in Project Preferences, to indicate the wire is a poke home wire which will be connected during installation.

For each wire, the following information is displayed:

Name The unique identifier for the wire within the selected design.
Component 1 This field is not used for harness reports.
Connector 1 The connector at which end 1 of the wire is terminated.
Pin 1 The name of the connector cavity at which end 1 of the wire is terminated.
Component 2 This field is not used for harness reports.
Connector 2 The connector at which end 2 of the wire is terminated.
Pin 2 The name of the connector cavity at which end 1 of the wire is terminated.
Color The color of the wire insulation.
Length The engineered length of the wire.
Wire CSA The cross-sectional area of the wire core.

Parent Topic:

Available Reports