Reports > Generating Reports > Available Reports

Custom Logic Wire List

You can select this option to display a list of check boxes to customize the wire list report.

For each wire, you can select the following check boxes to display the attributes and properties on the report:

Attributes

or Properties of Wire

Name The name assigned to the wire in Capital Logic Designer.
Description Descriptive text entered into the Description field of the design.
Short Description Short description entered against the design.
Wire CSA The cross-sectional area of the wire.
Wire Length The length of the wire.
Wire Specification The wire specification.
Architectural Cost The architectural cost of the wire.
Assembly The assembly the wire is part of.
Customer Name The unique name used to identify the component to the customer.
Customer Part Number The unique number used to identify the component to the customer.
Default Name The default name of the wire within the selected design.
Design The name of the design.
Design Abstraction The abstractions assigned to the design.
Generated Name The generated name of the wire on the diagram.
Harness The name of the harness in which the wires exist.
Included On BOM Indicates if the wire is included on the bill of materials.
Included On Cut Chart Indicates if the wire is included on the cut chart.
Length Change Type Specifies the Length Change Type applied to the wire: Neither, Absolute, or Offset.
Length Change Value Specifies a value used to override the calculated wire length, based on the Length Change Type.
MCAD ID If the harness was bridged in from an MCAD application, this field displays the component's unique identifier as derived from the external data.
Modified Length The modified length of the wire.
Multicore The name of any multicore to which the wire belongs.
Name Overridden The previous name of the wire if it has been overridden.
Option Expression The options applied to the wire.
Outside Diameter Specifies the outside diameter of the wire.
Part Number The part number of any library part associated with the wire.
Poke Home Indicates if the wire is poke home wire, connected during installation.
Revision The design revision.
Status The release status of the design.
Supplier Name The name of the supplier from which the component is sourced.
Supplier Part Number The number used by your supplier to identify the component.
Terminal Material Code The terminal material code applied to the end of the wire.
Type Code The component type, as defined within the library.
Unmodified Length The unmodified length of the wire.
Wire Color The color of the wire.
Weight The total weight of the harness.
Wire Material The material from which the wire is manufactured.
Wire Note Any additional information recorded against this wire.
Attributes Lists the attributes of the wire applicable for the Capital Logic Designer design, together with a text box to specify your required attribute. You can enter more than one attribute using a semi-colon separated list.
Properties Lists the properties of the wire applicable for the Capital Logic Designer design, together with a text box to specify your required property. You can enter more than one property using a semi-colon separated list.
Reset Resets all attributes and properties to their previous state prior to starting modifications.
Clear Clears all attributes and properties.

From

Wire End Attributes

From Component Name Lists the component name applicable for the start of a wire in Capital Logic Designer Designs.
From Component Option Lists the component option applicable for the start of a wire in Capital Logic Designer Designs.
From Connector Name Lists the connector name applicable for the start of a wire in Capital Logic Designer Designs.
From Harness Connector Part Number Lists the harness connector part number applicable for the start of a wire in Capital Logic Designer Designs.
From Pin Name Lists the pin name details applicable for the start of a wire in Capital Logic Designer Designs.
From Pin Option Lists the pin option details applicable for the start of a wire in Capital Logic Designer Designs.
From Mated Pin Name Lists the mated pin name details applicable for the start of a wire in Capital Logic Designer Designs.
From Mated Pin Option Lists the mated pin option details applicable for the start of a wire in Capital Logic Designer Designs.

To

Wire End Attributes

To Component Name Lists the component name applicable for the end of a wire in Capital Logic Designer Designs.
To Component Option Lists the component option applicable for the end of a wire in Capital Logic Designer Designs.
To Connector Name Lists the connector name applicable for the end of a wire in Capital Logic Designer Designs.
To Harness Connector Part Number Lists the harness connector part number applicable for the end of a wire in Capital Logic Designer Designs.
To Pin Name Lists the pin name details applicable for the end of a wire in Capital Logic Designer Designs.
To Pin Option Lists the pin option details applicable for the end of a wire in Capital Logic Designer Designs.
To Mated Pin Name Lists the mated pin name details applicable for the end of a wire in Capital Logic Designer Designs.
To Mated Pin Option Lists the mated pin option details applicable for the end of a wire in Capital Logic Designer Designs.

From

Wire End Properties

From Component Properties Lists the component properties as entered in the text box for the start of a wire in Capital Logic Designer Designs.
From Connector Properties Lists the connector properties as entered in the text box for the start of a wire in Capital Logic Designer Designs.
From Pin Properties Lists the pin properties as entered in the text box for the start of a wire in Capital Logic Designer Designs.
From Mated Pin Properties Lists the mated pin properties as entered in the text box for the start of a wire in Capital Logic Designer Designs.

To

Wire End Properties

To Component Properties Lists the component properties as entered in the text box for the end of a wire in Capital Logic Designer Designs.
To Connector Properties Lists the connector properties as entered in the text box for the end of a wire in Capital Logic Designer Designs.
To Pin Properties Lists the pin properties as entered in the text box for the end of a wire in Capital Logic Designer Designs.
To Mated Pin Properties Lists the mated pin properties as entered in the text box for the end of a wire in Capital Logic Designer Designs.
Next Click the Next button to confirm your selections and generate the report.

Parent Topic:

Available Reports

Capital Logic Designer User Guide, 2512

Source: https://docs.sw.siemens.com/en-US/doc/861057055/202410078.capital_ld_user/ida36ac396-dc0e-4e52-a478-b909d99496c2 · retrieved 2026-07-18