Consolidated Harness

Component BOM Report

This report consolidates Bill of Materials (BOM) details for all (or a selection) of child designs in a parent design, or all designs from a build list, into a single XLSX report file.

Figure 302 shows an example report. (For illustrative purposes, it is colored and has hidden columns).

Figure 302: Consolidated Harness Component BOM Example

Consolidation

• Components are consolidated per design.

• The report includes all components that have their “Included On BOM” (IOB) attribute set to “True”.

• Components with Unit of Measure (UOM) “Each” - the report sums the number of items with same Part Number + Part Revision + Supplier Part Number.

• Components with UOM “Per Length”: Wires and Multicores For items with the same part number, the report sums the values of the “Modified Length” attribute.

Insulations For items with same part number, the report sums the values of the “Calculated Length” attribute.

• The report also considers Part Revision and Supplier Part Number in its consolidation. Figure 303 shows a cut-down example of how the report consolidates Design 1 and Design 2 BOM items, as shown in Figure 304 and Figure 305. (For illustrative purposes, the report is colored). Figure 303: Consolidated BOM Report Figure 304: Design 1 BOM Items Figure 305: Design 2 BOM Items

Reported

Attributes

You can configure the report to include the following attributes as columns:

• Part Number This is mandatory and is always included in the report.

• Part Revision

• Part Description

• Customer Part Number

• Supplier Part Number

• Supplier Name

• Group Name

• Type

• Color

• Material

• Specification

• Unit of Measure

• Quantity This is mandatory and is always included in the report.

• Design Part Number

• Design Revision

• Design Take Rate

Parent Topic:

Consolidated Reports

Capital Harness Designer User Guide, 2512

Unpublished work. © 2025 Siemens