Active Harness Level

Before synthesizing wires, you must specify which harness levels you want to route for each harness in the topological design. You do this by setting active harness levels. One or more harness levels can be active for a harness.

You can set individual harness levels for a harness to active or you can set all harness levels in the topological design to active. If you set all harness levels to active, you route wires for the worst-case scenario harness.

Instead of manually setting the active harness levels for each harness, you can define a vehicle configuration and set that to active. See Methods of Defining a Vehicle Configuration and Setting an Active Vehicle Configuration.

If you set active harness levels and close a design, Capital Systems Integrator reapplies the active levels next time you open the design.

• Setting Individual Active Harness Levels for a Harness

• Setting all Harness Levels for Selected Harnesses to Active

• Setting Individual Harness Levels to Inactive

• Setting all Harness Levels for Selected Harnesses to Inactive

Parent Topic:

Harness Level

Capital Systems Integrator User Guide, 2512.2606

Unpublished work. © 2026 Siemens