Wire List

This report lists all wires on the selected designs, along with the pins at which they are terminated. For each wire, the following information is displayed:

• Name The unique identifier for the wire within the selected design.

• Component 1 The name of the component at which end 1 of the wire is terminated.

• Connector 1 If the wire is terminated at the component identified in the Component 1 field using a connector, the connector is identified here.

• Pin 1 The name of the pin at which end 1 of the wire is terminated.

• Component 2 The name of the component at which end 2 of the wire is terminated.

• Connector 2 If the wire is terminated at the component identified in the Component 2 field using a connector, the connector is identified here.

• Pin 2 The name of the pin at which end 2 of the wire is terminated.

• Color The color of the wire insulation.

• Length The length value assigned to the wire, entered manually or the bridged in from an MCAD application.

• Gauge The cross-sectional area of the wire core.

Parent Topic:

Available Reports

Capital Logic Designer User Guide, 2512

Unpublished work. © 2025 Siemens