Capital Wiring Integrator > Splices in Capital Wiring Integrator

Specifying the Harness Attribute

for a Splice in Capital Wiring Integrator

If Capital Wiring Integrator has not identified the correct harness for a splice, you can override the default harness by specifying a Harness attribute for it. When you refresh wiring (or re‑synchronize), the splice is re‑positioned in the specified harness.

You can specify the Harness attribute for an object on the Attribute tab in the Edit Properties facility using the Edit Harness Attribute facility, or see “Editing an Object Attributes and Graphical Display” in the Capital Systems Integrator User Guide.

Procedure

Select the object in the Diagram window or on a browser tab at the bottom left of the application window:Right-click and select Edit Harness Attribute.

Press the space bar and enter Set Harness Attribute.

The Edit Harness Attribute dialog box is displayed.

Enter the name of the harness or the harness group that the object is to be synchronized to.If harness names or harness groups have been created in Capital Project Manager, you can select one from the dropdown list in the Harness field.

Results

When you refresh wiring (or re-synchronize), the splice is re-positioned in the specified harness.
You can then run the Design Assistant to identify routing paths for the unrouted wires connected to these splices.

Parent Topic:

Splices in Capital Wiring Integrator