3D Separation Constraints in 3D Electrical Design

You can set 3D separation constraints against the 3D electrical context (or a Capital Wiring Integrator design) to control the separation of signal paths in the 3D environment.

For more information on setting constraints, see Rules and Constraints.

The "Wiring breaks 3D separation rules" design rule check highlights any wires which break existing 3D constraints set on the design. See Capital Wiring Integrator

• Consistency DRCs.

Define Exception Zone

Default: Do not check 3D separation within num from inline and slot end when Signal matches Name = *

Used to define a zone from an inline and slot end where 3D separation will not be checked for a matched signal. This is useful where signals come close together at devices, and you do not want to trigger a separation constraint violation.

Signal Separation by 3D Distance

Default: Signals with name Value1 and Value2 must maintain a minimum 3D separation of num

Used to specify the minimum distance which must be maintained when routing two matched signals.

Parent Topic:

Working in the 3D Electrical Context

3D Electrical Design User Guide, 2512.2606

Unpublished work. © 2026 Siemens