Converting a Line to an Arc for a Multi-location Node Component

You can convert a line to an arc for a multi-location node component.

Procedure

1. Select the multi-location node component association line to convert:Right-click a bundle and select Arc > Convert line to arc.

2. Position the cursor over a bundle segment on one side of the line to be converted.

3. Click to select the bundle segment (a red circle indicates the selected position).

4. Click to select the second bundle segment on the other side of the line.

Results

• The system creates the arc passing through the start of the segment, the selected point and the end of the segment.

Parent Topic:

Multi-location Node Components

Related Topics

• Adding a Multi-location Node Component

• Adding a Multi-location Wire End Component

• Add Multi-Location Node Component Help

• Editing a Multi-location Node Component

• Add Multi-Location Cavity Component Help

• Convert Waypoint to Arc Dialog Box

• Converting a Waypoint to an Arc for a Multi-location Node Component

Capital Harness Designer User Guide, 2512

Unpublished work. © 2025 Siemens