Usage Example - Fixture

Placement

The following usage examples illustrate the use of the bundle scoping and positioning parameters from junction, connector and for segment and arc. For more information on the use of constraints, see also “IESD Community Best Practice” on the Support Center.

Figure 314: Placement From Junction Example

Placement From Connector

In this example, as the constraint has been applied to All bundles the Internal bundle segment layout has arbitrarily started from N5.

Figure 315: Placement from Connector Example

Segment and Arc Placement

In this example of Segment and Arc placement, both using the Connector parameter, the arc segment is highlighted to show that the first fixture is placed at the beginning of the arc, with an offset of 0 (direction from N12) towards the junction.

Figure 316: Segment and Arc Placement Example

Scoping Specific Bundle Types

This example illustrates the scoping of fixtures to specific bundle types, midpoint pairs for internal bundles and center placed fixtures for Connector bundles.

Figure 317: Scope Specific Bundle Example

Parent Topic:

Capital Formboard Designer

Capital Harness Designer User Guide, 2512

Unpublished work. © 2025 Siemens