Options Tab (with Generate Topology Led Diagram Selected)

To access: Right-click a platform design in the Project Browser Window and choose Generate Wiring Diagram. The Options tab is displayed in the Generate Wiring Diagram Dialog Box.

Certain fields are available on the Options tab when Generate Topology Led Diagram is selected at the top of the Generate Wiring Diagram dialog box.

Objects

Field	Description
Use Logic Diagram Grid Spacing	Specify the grid spacing that is used in the generated diagram. Select this option to use the grid spacing from the Capital Logic Designer diagrams that are associated to the Capital Systems Integrator diagram. Clear this box to use the grid spacing from the Capital Systems Integrator diagram.
Use Refined Connectors	Clear this to have generated wiring diagrams with one wiring connector for each slot, interface or inline connector. Select this to have generated wiring diagrams with one wiring connector for each refined connector. See Connector Refinement and Signal Mapping for an overview of refining connectors. Note Many-to-many and many-to-one matings of refined inline connectors are not supported. If there are conflicts between the refined connectors in the harness levels, they are ignored.
Minimum Wire Spacing	Specify a value of 1 or above to control the minimum spacing between wires in the generated diagram. Entering values affects the diagram in these ways: The size of devices or inline connectors may increase. This could cause the overlapping of devices or inline connectors with other logical devices. Routing may not be optimal at bundle junctions if there is not enough space to route the wires. For examples of wiring diagrams with different Minimum Wire Spacing settings, see Wiring Diagrams with different Minimum Wire Spacing settings.

Parent Topic:

Generate Wiring Diagram Dialog Box - Options Tab

Capital Systems Integrator User Guide, 2512.2606

Unpublished work. © 2026 Siemens