Harness Designs

Auto Create Components

You can configure a set of constraints to automatically create or delete certain reference node and wire / multicore end components at different locations with part numbers and using conditions, offsets, or intervals.

Auto Create Component Constraints Overview
Running Auto Create Component Constraints
Configuring the FEM Task for Auto Place Components
Auto Create Additional Component
Auto Create Breakout Tape on Junction
Auto Create Component on Bundle with Offset
Auto Create Component on Insulation Run Ends with Offset
Auto Create Component on Multicore Ends
Auto Create Component on Wire End
Auto Create Components on Bundle at Interval
Auto Create Components on Insulation Run at Interval
Auto Delete Components

Parent Topic:

Harness Designs

Capital Harness Designer User Guide, 2512

Source: https://docs.sw.siemens.com/en-US/doc/861057055/202410078.capital_hd_user/id7c433ae8-6f04-1014-a82d-b4b83a9be425 · retrieved 2026-07-18