Capital Formboard Designer > Worst Case Bundle Sizes

Running Calculate Worst

Case Bundle Sizes

You can run the Calculate Worst Bundle Sizes action to calculate a more representative bundle size in order to render more accurate formboard diagrams.

Prerequisites

A full scale (length and width) composite diagram is open.

Procedure

Select Automate > Calculate > Worst Case Bundle Sizes from the ribbon.The Calculate Worst Case Bundle Sizes Dialog Box displays.
Select the Calculate Insulation Totals and Update Fixtures check boxes as required.
Click OK.

Results

All bundle sizes are re-calculated using the worst case Calculation Method.
Bundle rendering on the diagram is updated to reflect any re-calculated widths.
The bundle Width and Width with Insulation attributes are updated to reflect any changes.
Fixture part numbers are re-selected where appropriate, based on any re-calculated bundle sizes.
Selected Tubes are re-selected where appropriate, based any re-calculated bundle size.

Parent Topic:

Worst Case Bundle Sizes