Configuring Segregation Spacing

You can configure pairs of Segregation codes (cables) to override the default segregation rule and permit specific combinations of cables to be routed together and specify the minimum separation distances between them.

Different segregation spacings in a routing project are grouped into one “Spacing Class”. You can also use Spacing Class to configure derivatives under the default Fill types. See also Fill Types.

Figure 20: Example Spacing Class and Segregation Pairs

Procedure

1. Double-click Development projects.

2. Select the required project.

3. Double-click Library Data > General Data > Segregation Spacing.The Segregation Spacing and Sleeve Definition window is displayed.

4. Select the Spacing Class for your routing project.

5. Specify the Segregation codes to create the pairs of cables in the table rows.

6. Enter the minimum spacing value in the Min. Spacing[mm] column.

7. (Optional) Click Copy to add or overwrite the current segregation spacings from a different Spacing Class.

8. Click the Save button () to save the segregation spacing data to the routing project.

9. Click the Close button () to close the Segregation Spacing and Sleeve Definition window.

Parent Topic:

Using Capital Cable Router Admin

Capital Cable Router User Guide, 2512.2602

Unpublished work. © 2026 Siemens