Excluding

a Slot from a Harness

If you have combined a slot with one or more harnesses to form one manufacturable component but now want to separate them so that they are separate pieces again, you can exclude a slot from a harness.

Prerequisites

• The slot placement must not be constrained. See Device Connectors and Harness Connectors in Capital Systems Integrator for more information about constrained placements.

• The selected slot connector must not have a library part assigned to it.

Procedure

Select the slot connector for that harness on the slot in the diagram or in the Design Browser (Design tab) and either:

• Right-click it and choose Exclude Slot from Harness.

• Press Space Bar and enter Exclude Slot from Harness. Note If you have more than one bundle combined with the slot, you must repeat this for each of these bundles to exclude the slot from the harness.

Results

• The gray square representing the slot connector becomes larger.

• On the Attributes section of the General tab of the Edit Properties dialog box for the slot connector, the Integral attribute is unselected.

• If the name of the slot connector changed when it was combined with the harness, it changes back to the original name.

Parent Topic:

Harness

Related Topics

• Including a Slot with a Harness

Capital Systems Integrator User Guide, 2512.2606

Unpublished work. © 2026 Siemens