Splices > Center Strip Splices

Editing a Center Strip Splice

You can make various edits to a center strip splice, including moving it to a different splice on the design.

Procedure

Press Space Bar and enter Wires, or press the W key. The Edit Wires Dialog Box is displayed.
Select the center-stripped wire in the Wires list.
Click the Additional Info tab; the center-strip options for the wire are indicated in the Center Strip Splices section.

Route the wire through an additional splice (center-stripping it at that splice) by selecting the box to the left of the splice Name, and then specifying the Strip Length to remove.
Move the wire from one splice to another by first deselecting the existing splice position, and then selecting a new splice through which to route the wire.
Change the route of the wire through multiple center-strips by entering Order values; the wire passes through the splice with the lowest order first, and then the next lowest, and so on.
Modify the Strip Length to be removed from the wire at the splice.
Select the Length Change Type to be applied to the center-strip. Options available are Absolute, Offset or Neither. This dictates how any Distance Change is applied to the center-strip, which in turn affects the modified and unmodified lengths of the center-strip depending if Harness Engineering has been run.
Click OK, to confirm the changes and close the dialog box.

Parent Topic:

Center Strip Splices