Multi-location Components > Multi-location Cavity Components

Adding a Multi-location

Cavity Component

You can add a multi-location component to two or more cavities of a connector or splice.

Procedure

Press Space Bar and enter Multi-Location Cavity. The Add Multi-Location Cavity Component Dialog Box is displayed.
In the Select Locations option group, click the ellipsis (...) button to the right of the Name field; the Select Connector/Splice Dialog Box is displayed. Select the connector or splice that owns the cavity into which the multi-location component will be inserted.
Select the cavity into which you want to insert the component, from the Cavities dropdown list.
Repeat steps 2 and 3 until all cavities are selected.
Click the ellipsis (...) button to the right of the Library Part field. The Part Selection Dialog Box is displayed to search for and insert a component from the library. The associated component will be displayed in the Library Part field.
Click OK.

Results

The multi-location cavity component is placed onto the design. The following component entities are displayed: The component part number

Any Name assigned to the component

Any symbol associated with the component

A cavity table Note The multi-location cavity component entities listed comprise the default offering as dictated by the style set shipped with Capital Harness Designer. Both the entities displayed, and the appearance of those entities, can be modified. This includes specifying whether a line end arrow style will be none, open, clear, or filled and its direction, either left or right. See also the Capital Diagram Styling User Guide.

The multi-location node component is added to the Harness Design Browser.

Parent Topic:

Multi-location Cavity Components