Capital Systems Integrator Dialog Box and Field Reference > Miscellaneous Dialog Boxes

Add Wire Dialog Box

To access: Right-click the connector from which you want the wire to start in the design browser (Design tab) and choose Add Wire. Alternatively, click the connector, press Space Bar and enter Add Wire.

Use this dialog box to add a wire between two cavities on separate connectors.

Objects

Field	Description
Signal	The name of the signal that connects to the selected cavity in the From End window.
From End	Select the cavity at which you want the wire to start. Each cavity displays in the format :: (signal name). If the connector is not on a slot, no slot name displays.
To End	Select the cavity at which you want the wire to end. Each cavity displays in the format :: (signal name). If the connector is not on a slot, no slot name displays. If you are adding a wire from a cavity on a ground slot, the To End box lists cavities on all other ground slots (including those on different harnesses). Note that you may need to create more than one wire if the target cavity is in a different harness). If a cavity in the To End box connects to a different signal to the one that is connected to the cavity in the From End field, the signal name in the To End box displays in red.
Harness	Displayed only if there are multiple harnesses at the connector. Select the harness to which you are adding the wire from the drop-down list.

Parent Topic:

Miscellaneous Dialog Boxes