Dialog and Field Reference > Component Dialogs

Edit Arc Dialog Box

To access: right-click an arc, select Arc

Edit Arc and click the bundle segment adjacent to the arc that you want to retain its orientation following the edit.

Used to edit a curved section on a bundle.

Objects

Field	Description
Radius	Specifies the perpendicular distance between the bundle point at which the arc begins, and the point about which the bundle rotates for the duration of the arc. Mandatory.
Travel Angle	Specifies the number of degrees the exit section of the arc should deviate from its current direction of travel. Positive values result in anti-clockwise deviation; negative values result in clockwise deviation. Mandatory.
Segment Length	Specifies the length of the selected, straight bundle segment attached to the end of the arc. Mandatory, displayed only if editing a full scale diagram.
Rotate Attached Bundles	Specifies whether the parts of the bundle configuration attached to the end of the arc should be rotated through the Travel Angle (selected) or whether they should retain their current orientation (cleared). Mandatory.

Parent Topic:

Component Dialogs