Module Code Management

Setting Wiring in Particular Modules to Active in the Design

You can set wiring in particular modules to active in the design. You can then filter the display of graphical objects in the Diagram Window to only those objects with active wiring.

See Filtering the Objects Displayed in a Capital Systems Integrator or Capital Wiring Integrator Diagram in the Capital Design Tools - Common Functions User Guide.

Procedure

Click the Configuration Setting Browser Window (Configuration tab) on the left of the application window and choose Module from the drop-down Mode list; the browser window on the tab lists the harnesses in the design.
Select the harness(es) for which you want to edit modules and click the Manage module codes for selected harnesses () button; the browser tree expands below each selected harness to display the modules that you have created for the wires in them. It also displays the wires in those modules. See the Browser Window (Module) section of Configuration Setting Browser Window (Configuration Tab) for full details of its contents.
Set the required modules to active. Either:Without a harness selected, click the Set all modules in place active () button; the system sets all wiring for all modules in the design to active. All modules and wires display in bold in the browser window.

Select the harnesses for which you want to make the modules active, and click the Set all modules in selected harnesses active () button; the system sets the modules for those harnesses to active. The modules and wires for them display in bold in the browser window.

Select the box next to each module for which you want to make the wiring active; the system sets all wiring for the selected modules to active. The modules and wires listed below them display in bold in the browser window.

Parent Topic:

Module Code Management