Editing Ground Signals

Before you create wires, you can add ground signals to a design. You can do this when editing a Capital Systems Integrator design in single user mode only. You specify a name for a signal and the cavities between which it flows.

After you have added a ground signal, you can use either wiring synthesis or the manual Add Wire functionality to connect wires to the cavities to implement the ground signal.

Procedure

1. Press Space Bar and enter Export Wiring; the Edit Ground Signals Dialog Box displays.

2. The Ground Signal window lists the existing ground signals. To add a ground signal to the design, click the Add button below the Ground Signal window and specify the signal name in the Signal Name dialog box that displays. Click the OK button to exit that dialog box.Note You can delete or rename a ground signal by clicking on it in the Ground Signal window and clicking the Delete button or Rename button.

3. The cavities between which it can flow display in the Available Cavities window. Keep the signals selected in the Ground Signals window and select the cavities between which you want the ground signal to flow and click the Add button to the right of the window to add them to the Selected Cavities window.Note You can remove cavities from the Selected Cavities window by clicking on them and clicking the Remove button. To add all of the cavities to the Selected Cavities window, click the Add All button. To remove all cavities from the Selected Cavities window, click the Remove All button.

4. Click the OK button to save your changes and exit the dialog box.

Parent Topic:

Wiring

Related Topics

• Synthesizing Wiring

• Adding a Wire

Capital Systems Integrator User Guide, 2512.2606

Unpublished work. © 2026 Siemens