Adding a

Specific Logical Inline Pair to a Bundle

You can add an unplaced inline pair (from an associated Capital Logic Designer design) to a bundle.

Prerequisites

• The Capital Logic Designer design containing the logical inline pair must be associated with the topology diagram. See Logical Design Association.

Procedure

1. In the Wiring Browser, navigate to the inline plug connector or inline receptacle connector.

2. Double-click the connector and hover over the bundle to place the inline pair.A line is displayed across the cursor if the location is invalid. A ghost image indicates how the inline pair graphic will look.

3. Click to place it.

Results

• The inline pair is added to the Diagram window.

• The harness to which it is added is split into two and the new harness is added to the Design Browser (Capital Wiring Integrator).

• The inline plug connector and inline receptacle connector are listed below the Inlines node of the Design Browser.

• The inline plug connector and inline receptacle connector are displayed below the harnesses to which they connect in the Design Browser.

• An association is created between the logical inline pair and the topology inline pair.

Parent Topic:

Inline Pairs

Related Topics

• Inline Pairs

• Adding an Unassociated Inline Pair to a Bundle

• Editing an Inline Plug Connector or an Inline Receptacle Connector

• Specifying a Route Code for an Inline Plug Connector or an Inline Receptacle Connector

• Moving an Inline Pair

• Deleting an Inline Pair from a Bundle

• Toggling the Inline Plug Connector and Inline Receptacle Connector on an Inline Pair

• Constraining the Automatic Association of Inline Halves

Capital Logic Designer User Guide, 2512

Unpublished work. © 2025 Siemens