Bundle Configuration > Bundle Manipulation > Using the Menu Commands > Bundle Arcs

Editing an Arc

You can edit an arc on a bundle on both full and non-full scale diagrams.

Tip

See Bundle Manipulation Overview to use the Manipulation Handles to edit bundle positions and shapes.

Procedure

Either:Right-click the arc to be edited and select Arc > Edit Arc. The cursor changes to . Click to select the bundle segment adjacent to the arc that you want to retain its orientation following the edit. The Edit Arc Dialog Box is displayed. Or if editing a full scale diagram: Press Space Bar and enter Bundle Palette; the Bundle Palette Dialog Box is displayed. Select the arc and select the bundle segment adjacent to the arc that you want to retain its orientation following the edit. The settings for the arc are displayed in the Edit Selected Arcs table.
Make any changes required to the Radius, Travel Angle, and Segment Length (if editing a full scale diagram). The Rotate Attached Bundles option is also available for amendment.
Either:Click OK in the Edit Arc dialog box

Click Apply in the Bundle Palette dialog box

The arc is redrawn based in the new values. Note When using the Bundle Palette dialog box, you can select combinations of arcs and adjacent bundles to populate multiple rows of the Edit Selected Arcs table with arcs that you want to edit. This is particularly useful when you want to align multiple parallel arcs. You may also edit a contiguous arc sequence to allow the formation of “soak up” areas.

Parent Topic:

Bundle Arcs