Moving Multiple Splices

You can move two or more splices from one bundle, or section of bundle, to another.

Procedure

1. To move splices as a group, press the Ctrl key and select the splices.

2. Right-click one of the following entities related to the splices to be moved and select Move Splices.Reference node at which one of the splices is placed.

Splice cavity table.

Splice symbol.

The cursor changes to .

3. Place the splices at the new location:The cursor changes to at a valid location. If you click a node, the splices are placed, anchored at that node.

If you hover the cursor over a bundle, a tooltip displays the distance between the cursor position and the adjacent node in the direction of the start of the bundle. Note If the new position violates any rules and constraints on splice repositioning, the cursor changes to indicate that you cannot position the splices at that point and you must choose a different location.

4. Click to place the splices.The Node Position Utility Dialog Box is displayed.

5. Specify the values to fine‑tune the position of the reference nodes created to anchor the splices to the bundle.

6. Click OK to confirm the new positions.

Parent Topic:

Splices

Related Topics

• Adding a Center Strip Splice

• Add Splice Help

• Moving a Splice

• Deleting a Splice

• Adding a Splice with an Associated Library Part

• Adding a Splice without an Associated Library Part

• Editing a Splice

Capital Harness Designer User Guide, 2512

Unpublished work. © 2025 Siemens