Removing Selected Child Signals from a Combined Signal

You can remove (uncombined) selected child signals from a combined signal so that they use separate wires.

Procedure

1. In the Design Browser (Design tab), select the child signals below the combined signal.

2. Right-click a selected child signal and choose Uncombine.The selected signals are moved from under the combined signal in the Design Browser (Design tab). Any combined wires that belong to the signals are split and are added to the split child signals.

Parent Topic:

Combined Signals and Combined Wires

Related Topics

• Combined Signals and Combined Wires

• Creating a New Combined Signal from Selected Signals

• Adding Selected Signals to an Existing Combined Signal

• Combining Selected Signals with a Compatible Signal

• Uncombining All Child Signals from a Combined Signal

• Creating a New Combined Wire from Selected Wires

• Creating a New Combined Wire from a Selected Set of Wires for a Combined Signal

• Adding Selected Wires to an Existing Combined Wire

• Combining Selected Wires with a Compatible Wire

• Uncombining Wires

Capital Systems Integrator User Guide, 2512.2606

Unpublished work. © 2026 Siemens