Generating Reports > Available Reports

Wire List

This report lists all wires on the selected design(s), along with the pins at which they are terminated.

For each wire, the following information appears:

Name The unique identifier for the wire within the selected design.
Component 1 The name of the component at which end 1 of the wire is terminated.
Connector 1 If the wire is terminated at the component identified in the Component 1 field, above, via a connector, the connector is identified here.
Pin 1 The name of the pin at which end 1 of the wire is terminated.
Component 2 The name of the component at which end 2 of the wire is terminated.
Connector 2 If the wire is terminated at the component identified in the Component 2 field, above, via a connector, the connector is identified here.
Pin 2 The name of the pin at which end 2 of the wire is terminated.
Color The color of the wire insulation.
Length The length value assigned to the wire, either by manually entering a wire length, or via the bridging in of wire lengths from an MCAD application.
Gauge The cross-sectional area of the wire core.

Parent Topic:

Available Reports

Capital E/E Publisher User Guide, 2512.2606