Shared Object Usage

This report lists all shared object revisions used on the selected designs. Reports can be generated for shared objects such as conductors, devices and multicores. Depending on the type of shared object that appears on the design the following information is displayed:

• Name The name of the shared object.

• Part Number The part number associated with the shared object.

• Part Revision The revision number of the library component part. See Library Part Revision in the Capital Component Manager User Guide.

• Description The library part description of the shared object, as defined in Capital Component Manager.

• Type The shared object type, such plug, connector or splice and so on.

• Component The component name in the report, such as device or splice and so on.

• Connector

The name of the connector to which conductors are connected.

Note

The default comment symbol for the connector assigned to the library part will also be displayed, if defined.

• Pin The name of the pin at which a wire is terminated.

• Design Revision The Design Revision where conductors are present.

• Diagram The name of the diagram.

• Zone The zone in which the shared object appears on the diagram.

• Conductor The conductors connected to the pin lists.

• PinMated / PinBackshell The mated or backshell pin name details applicable in Capital Logic Designer Designs.

Parent Topic:

Available Reports

Capital Logic Designer User Guide, 2512

Unpublished work. © 2025 Siemens