Adding an Inline Plug with an Associated Library Part

You can place an inline plug (inline half) onto a topological design by associating a connector from the library.

Procedure

1. Press Space Bar and enter Add Plug.A ghost image of the inline plug displays next to the cursor.

2. Click to place the inline plug:If you click the end of a bundle, the inline plug is connected to that bundle.

If you click an empty area of the design, the inline plug is not connected to anything.

An inline plug is placed on the diagram and added to the Design Browser (Design tab).

3. Either:Right-click the inline plug and choose Properties.

Click on the inline plug, press Space Bar and enter Properties.

The Edit Properties: Inline Plug Connector dialog box displays.

4. In the Library Part section, click Add.The Part Selection dialog box displays allowing you to search for and insert a connector from the library. Find the part you want, select it and click Insert.

5. The associated connector is displayed next to the Library Part text.

6. Click OK.

Parent Topic:

Inline Pair

Related Topics

• Inline Pair

• Adding an Inline Pair to a Diagram

• Deleting an Inline Pair

• Adding an Inline Receptacle with an Associated Library Part

• Adding an Inline Receptacle without an Associated Library Part

• Adding an Inline Plug without an Associated Library Part

Capital Systems Integrator User Guide, 2512.2606

Unpublished work. © 2026 Siemens