Consolidated Wire Multicore

Report

This report consolidates wire and multicore information for all (or a selection) of designs in a parent design, or all designs from a build list, into a single XLSX report file.

Consolidation

• The report consolidates the data based on wire / multicore names. It considers option expressions where wires are connected to variant placed connectors.

Reported

Attributes

You can configure the report to include the following attributes as columns:

Wire / Multicore Information

• Name This is mandatory and is always included in the report.

• From Displays blank for multicores.

• From Cavity Displays blank for multicores.

• To Displays blank for multicores.

• To Cavity Displays blank for multicores.

• Option Expression

Library / Part Information

• Part Number

• Customer Part Number

• Supplier Part Number

Wire / Multicore Information

• Color

• C.S.A Displays blank for multicores.

• Specification

• Material

• Multicore This is the multicore or multicore parent in case of nested multicores.

• Length This is mandatory and is always included in the report.

• Length Change Type

• Length Change Value

• Include on BOM

• Include on Cut Chart

Wire End Information

• Term End 1 Displays blank for multicores.

• Seal End 1 Displays blank for multicores.

• Strip End 1 Displays blank for multicores.

• Term End 2 Displays blank for multicores.

• Seal End 2 Displays blank for multicores.

• Strip End 2 Displays blank for multicores.

Multicore Information

• Multicore Type Displays blank for wires.

• InHouse Multicore Displays blank for wires.

• CutBack Value End A Only applicable when Multicore Type is “Sheathed”. Blank if Multicore Type is “Twisted”. Displays blank for wires.

• CutBack Change Type End A Only applicable when Multicore Type is “Sheathed”. Blank if Multicore Type is “Twisted”. Displays blank for wires.

• CutBack Change Value End A Only applicable when Multicore Type is “Sheathed”. Blank if Multicore Type is “Twisted”. Displays blank for wires.

• Unmodified Cut Back End A Only applicable when Multicore Type is “Sheathed”. Blank if Multicore Type is “Twisted”. Displays blank for wires.

• Untwisted Value End A Only applicable when Multicore Type is “Twisted”. Blank if Multicore Type is “Sheathed”. Displays blank for wires.

• Untwisted Change Type End A Only applicable when Multicore Type is “Twisted”. Blank if Multicore Type is “Sheathed”. Displays blank for wires.

• Untwisted Change Value End A Only applicable when Multicore Type is “Twisted”. Blank if Multicore Type is “Sheathed”. Displays blank for wires.

• Unmodified Untwisted Value End A Only applicable when Multicore Type is “Twisted”. Blank if Multicore Type is “Sheathed”. Displays blank for wires.

• CutBack Value End B Only applicable when Multicore Type is “Sheathed”. Blank if Multicore Type is “Twisted”. Displays blank for wires.

• CutBack Change Type End B Only applicable when Multicore Type is “Sheathed”. Blank if Multicore Type is “Twisted”. Displays blank for wires.

• CutBack Change Value End B Only applicable when Multicore Type is “Sheathed”. Blank if Multicore Type is “Twisted”. Displays blank for wires.

• Unmodified Cut Back End B Only applicable when Multicore Type is “Sheathed”. Blank if Multicore Type is “Twisted”. Displays blank for wires.

• Untwisted Value End B Only applicable when Multicore Type is “Twisted”. Blank if Multicore Type is “Sheathed”. Displays blank for wires.

• Untwisted Change Type End B Only applicable when Multicore Type is “Twisted”. Blank if Multicore Type is “Sheathed”. Displays blank for wires.

• Untwisted Change Value End B Only applicable when Multicore Type is “Twisted”. Blank if Multicore Type is “Sheathed”. Displays blank for wires.

• Unmodified Untwisted Value End B Only applicable when Multicore Type is “Twisted”. Blank if Multicore Type is “Sheathed”. Displays blank for wires.

Design Information

• Design Part Number This is mandatory and is always included in the report.

• Design Revision

• Design Take Rate

Parent Topic:

Consolidated Reports

Capital Harness Designer User Guide, 2512

Unpublished work. © 2025 Siemens