Manually Specifying the Options that Affect a Harness

You can manually specify the options that affect a harness and that can then be supported by harness levels for that harness.

You do not need to do this if you have run Modular Wiring Synthesis.

Procedure

1. With a Capital Systems Integrator diagram open, press Space Bar and enter Harness Level optimization; the Harness Level Optimization Dialog Box displays. The harnesses in the design are listed in the Harness table.

2. Select the harness for which you want to specify the options and click the Define Harness Levels () button; the Harness Levels for: Dialog Box displays. The dialog box lists the harness levels that you have created for the harness.

3. Click the Set the options that affect the Harness () button; the Set Harness Options Dialog Box (Capital Configuration Optimizer) displays.

4. Add the options that affect the harness to the Selected window.

5. Click OK.

6. The selected options display in the Levels table on the Harness Levels for: Dialog Box.

Parent Topic:

Harness Level

Related Topics

• Harness Level

• Manually Creating a Harness Level for a Harness

• Manually Editing a Harness Level for a Harness

• Manually Combining Harness Levels into One

• Manually Deleting a Harness Level for a Harness

• Manually Deleting all Harness Levels for a Harness

• Editing the Properties and Attributes of a Harness Level

• Importing Harness Level Definitions (Harness Optimization)

• Exporting Harness Level Definitions (Harness Optimization)

Capital Systems Integrator User Guide, 2512.2606

Unpublished work. © 2026 Siemens